Usenix ATC 2020 : Usenix Annual Technical Conference
Call For Papers
The 2020 USENIX Annual Technical Conference (USENIX ATC '20) seeks original, high-quality submissions that improve and further the knowledge of computing systems, with an emphasis on implementations and experimental results. We are interested in systems of all scales, from small embedded mobile devices to data centers and clouds. The scope of USENIX ATC covers all practical aspects related to systems software, including but not limited to: operating systems; runtime systems; parallel and distributed systems; storage; networking; security and privacy; virtualization; software-hardware interactions; performance evaluation and workload characterization; reliability, availability, and scalability; energy/power management; bug-finding, tracing, analyzing, and troubleshooting.
We welcome experience submissions that clearly articulate lessons learned, as well as submissions that refute prior published results. We value submissions more highly if they are accompanied by clearly defined artifacts not previously available, including traces, original data, source code, or tools developed as part of the submitted work. We particularly encourage new ideas and approaches.
A good submission will typically: motivate a significant problem; propose a practical solution or approach that makes sense; demonstrate the pros and cons of the latter using sound experimental and statistical evaluation methods; disclose what has, and has not, been implemented; articulate the new contributions beyond previous work; and refrain from over-claiming, focusing the abstract and introduction sections primarily on the difference between the new proposal and what is already available. Submissions will be judged on relevance, novelty, technical merit, and clarity.
Submissions are expected to avoid committing benchmarking crimes.
Authors of resubmitted work will be given the opportunity to describe in a separate note the changes since the previous submission(s). While this is optional, authors are encouraged to do so, as it helps reviewers who may have reviewed a previous draft of the work to appreciate any improvements to currently submitted work.
Papers must be submitted before the aforementioned submission deadline via the USENIX ATC '20 submission site, which will be available soon. Submissions must be in PDF format. No extensions will be given. There is no separate deadline for abstracts registration. Submissions must strictly adhere to the policies specified below. By submitting, you agree that at least one of the authors will attend the conference to present the paper if accepted. Submissions accompanied by nondisclosure agreement forms will not be considered.
Submission Type: Full vs. Short
USENIX ATC accepts both full and short submissions. Short submissions are limited to roughly half the space of full-length submissions. Both types are reviewed to the same standards and differ primarily in scope. A short paper is not like a workshop "position" paper—it presents a complete idea, which does not require full length to be appreciated. The idea should be concisely formulated and evaluated, and conclusions should be drawn from it, just like in a full-length paper. The program committee may, in rare cases, decide to accept a full submission on the condition that it is cut down to fit in the short paper page limit. Short papers will be included in the proceedings and presented at the conference like full papers during a slightly shorter time slot.
Submissions must contain original unpublished material that is not under review at any other forum, including journals, conferences, and workshops with proceedings. Submissions that extend your own previous work—in a significant way—are welcome, but you must explain the differences between your current USENIX ATC submission and your prior work. You should also relate your current USENIX ATC submission to relevant submissions of your own that are simultaneously under review for this or other venues. The next section discusses how to do so while maintaining anonymity.
Simultaneous submission of the same work to multiple venues, submission of previously published work, or other violations of the above policies constitute plagiarism, dishonesty, or fraud. USENIX prohibits these practices and may, on the recommendation of a program chair, take action against authors who have committed them; see the USENIX Conference Submissions Policy for additional details.
USENIX ATC '20 will employ double-blind reviewing, keeping author identities concealed from reviewers. You must therefore make a good faith attempt to anonymize your submissions by avoiding identifying yourself or your institution, either explicitly or by implication, e.g., through references, acknowledgments, online repositories that are part of the submission, or direct interaction with committee members. Do not say "reference removed for blind review." When it is necessary to cite your own studies, there are only two possibilities: cite them (1) as written by a third party (preferable), or (2) as uploaded anonymized supplemental material (see below). This guideline applies in particular to any of your workshop papers that are being extended by your current USENIX ATC submission. Related submissions of your own that are simultaneously under review or awaiting publication at other venues should typically opt for the second option. Publication as a technical report or in an online repository does not constitute a violation of this policy, because they are not peer-reviewed. Papers that are not properly anonymized may be rejected without review.
Anonymized Supplemental Material
Supplemental material may be submitted as a single-but-separate anonymized file without page limit. Note that the reviewers are not required to read such material or consider it in making their decision. Any material that should be considered to properly judge the paper for acceptance or rejection is not supplemental and will apply to the page limit.
When registering a submission, all its co-authors must provide information about conflicts with the USENIX ATC '20 program committee (PC) members and extended review committee (ERC) members. You are conflicted with a member if: (1) you are currently employed at the same institution, have been previously employed at the same institution within the past two years (2017 or later), or are going to begin employment at the same institution; (2) you have a past or present association as thesis advisor or advisee (no time limit); (3) you have collaborated on a project, publication, grant proposal, or editorship within the past two years (2017 or later); or (4) you have spouse or first-degree relative relations.
Do not declare a conflict if you discussed your submission with a PC/ERC member before the USENIX ATC '20 PC/ERC lists were publicized. (And refrain from discussing it after.) Do not declare a conflict merely because you wish to avoid a review from a specific committee member; such unethical behavior might result in immediate rejection. All conflicts will be reviewed to ensure the integrity of the reviewing process.
Full submissions must not exceed 11 pages, and short submissions must not exceed 5 pages, including all text, figures, tables, footnotes, appendices, etc. Bibliographic references, however, are not included in the page limit. The reviewers will value conciseness, so if you can describe your work with fewer pages than the limit, please do. Because references do not count against the page limit, they should not be formatted using a smaller font, and the names of all co-authors should be specified.
Use US letter paper size, with all text and figures fitting inside a 7" x 9" (178 mm x 229 mm) block centered on the page, using two columns separated by 0.33" (8 mm) of whitespace. Note that the text block size has changed in 2019, to be more consistent with formatting rules of other systems conferences.
Use 10-point font (typeface Times Roman, Linux Libertine, etc.) on 12-point (single-spaced) leading. Graphs and figures can use colors but should be readable when printed in monochrome, without magnification. All pages should be numbered, and references within the paper should be hyperlinked. Labels, captions, and other text in figures, graphs, and tables must use reasonable font sizes that, as printed, do not require extra magnification to be legible. Submissions that violate any of these restrictions will not be reviewed. No extensions will be given for reformatting.
USENIX's latest LaTeX/Word template were updated in 2019 and the style files are available on the USENIX templates page.
New in 2020: Early Rejection Notifications
USENIX ATC '20 will conduct its reviews in multiple rounds. Papers that pass a given round are assigned additional reviewers to help make a sound decision for each paper. Some papers, however, may be rejected in an early round. USENIX ATC '20 will send early rejection notifications to such authors at least a month ahead of the date that all remaining notifications are sent (acceptances and additional rejections). These decisions are final and authors of early rejected papers will not be asked to provide a rebuttal (see below). Authors who receive an early rejection notification will also not receive another notification later on. Authors of rejected papers at this early stage are therefore free to read their paper's reviews and use the extra time to consider revising and resubmitting the work to a future conference.
Authors Response Period
USENIX ATC '20 will provide an opportunity for authors to respond to reviews prior to final consideration of the submissions at the program committee meeting according to the schedule detailed above. Authors must limit their response rebuttal to: (1) correcting factual errors in the reviews; and (2) directly addressing questions posed by reviewers. Rebuttals should be limited to clarifying the submitted work. In particular, rebuttals must not include new experiments/data or describe additional work completed since submission, or promises of additional work to be performed. Rebuttals are optional. Rebuttals are limited to no more than 500 words.
All submissions will be treated as confidential prior to publication on the USENIX ATC '20 website. Rejected submissions will be permanently treated as confidential.
Submissions selected by the program committee will be conditionally accepted, subject to revision and approval by a program committee member acting as a shepherd. Accepted (long and short) papers will be allowed one additional page in the proceedings. One author of each accepted paper will present the work at the conference in a designated time slot.
By default, all accepted papers will be made available online to registered attendees before the conference. If your accepted paper should not be published prior to the event, please notify firstname.lastname@example.org before the camera-ready date. Accepted papers, however, will be made available online to everyone beginning on the first day of the conference.
If the conference registration fee will pose a hardship for the presenter of the accepted paper, please contact the Conference department. If your paper is accepted and you need an invitation letter to apply for a visa to attend the conference, please email email@example.com as soon as possible. (Visa applications can take at least 30 working days to process.) Please identify yourself as a presenter and include your mailing address in your email.
The program will include poster sessions. Details about poster submissions will be available soon.
In addition to the regular presentations, authors of all accepted papers will present their work in 120-second "lightning talks" during the lighting session(s). A corresponding lightning video should be submitted to appear on the conference site in advance of the conference.
Best Paper Award
Cash prizes will be given for the best paper(s) at the conference. Both full and short papers will be considered. Please see USENIX's Best Papers page to see the winners from previous years.